Tank Vehicle mounted control unit displays overfill prevention, retained product, and fault condition status for safe loading and ease of troubleshooting
The only system kit in the industry that includes a 5-year sensor warranty
Enhanced programming and diagnostics for quick installation and troubleshooting
Features Dynacheck®, automatic and continuous self-checking circuitry for fail-safe operation
Upon detection of a fault condition, the IntelliCheck®3 system shuts down its outputs and ceases loading operation
Retained Product Monitoring feature helps prevent product mixing and requires driver acknowledgement of retained product before loading can occur
High-level detection in each vehicle compartment, using either Scully Two-Wire or Five-Wire Sensors
System shutdown within one-half second of high-level or fault condition detection
Individual sensor indicators for fault condition such as “wet” sensor or operational faults
New Five-Wire Series wired sensor compatibility adds diagnostic capability to five-wire vehicles
Detects opens, shorts, and helps pinpoint specific sensor to save time in troubleshooting
Dynacheck® Safety
Complete automatic and continuous checking of all system components
Complete system diagnostics
Visual indication of Dynacheck® self-checking, sensor status, and fault conditions
Indicator for auxiliary switch operation, such as vapor interlock
Loading rack connection indicators
Retained Product Monitoring
Retained product detection using Two-Wire Optic Sensors
Loading “lock-out” feature if vehicle returns with product
Driver must press retained product acknowledge button for loading to occur
Helps prevent product mixing
Warns against overfilling of vehicle compartments
Advanced Optic Sensing
Each sensor is independently monitored and tested up to 30 times per second
Withstands extreme road and temperature conditions
IntelliCheck® Kits include Scully sensors—the most reliable sensors in the market, with nearly double the warranty of any other sensor
Ordering Information
Intellicheck®3 Complete Assembly
Part Numbers listed below that include “(M20)” are ATEX approved, all others meet North American standards. For left-curb side truck and trailers contact Scully at sales@scully.com.
Part #
Description
09562
IntelliCheck®3 Overfill Control Unit
09580
IntelliCheck®3 Overfill Control Unit (M20)
09566
IntelliCheck®3 Overfill and Retained Control Unit
09582
IntelliCheck®3 Overfill and Retained Control Unit (M20)
09578
IntelliCheck®3 Dual Level Monitor
09583
IntelliCheck®3 Dual Level Monitor (M20)
IntelliCheck®3 Upgrade Kit
Part Numbers listed below are for FM approved Products; for ATEX approved products contact Scully at sales@scully.com.
Includes the IntelliCheck®3 module, window kit, compliance label & quick start guide
Part #
Description
09584
Intellicheck®3-R Upgrade Kit, Overfill 8
09585
Intellicheck®3-R Upgrade Kit, Overfill and Retained
09586
Intellicheck®3-R Upgrade Kit, Dual Level
IntelliCheck®3 Replacement Parts
FM-approved part numbers are listed in the table below. For a complete list of ATEX approved part numbers, please contact Scully at sales@scully.com.
Standoff, Male-Female, 5/16″ Hex, 10-32 x 7/8″ Lg., Aluminum
26425
Fuse and Holder, In-Line, 1/2 AMP
26427
Fuse Only
IntelliCheck®3 Kits – Overfill Only System
IntelliCheck®3 Overfill Only System Kit 1 with 7″ Overfill Sensor
2-Wire System Kits Include: Control Unit, Conductor Cable (100 feet), Ground Bolt, 7” Standard Sensor
IntelliCheck®3 Overfilll & Retained System Kit 1 with 7″ Overfill Sensor
Includes 2-Wire System Kits Include: Control Unit, Conductor Cable (100 feet), Ground Bolt, 7” Standard Sensor